Sales
Rental
Repair
Paint, Caulk, Adhesives & Chemicals
Boise, ID 208-377-0158
Eugene, OR 541-342-3641
Idaho Falls, ID 208-522-7082
Medford, OR 541-779-0187
641
SPRAYON®
Food Grade Chain Lubricant
Sprayon® LU™205 Food Grade Chain Lubricant is a
blend of the finest quality renewable resource oils
available, treated with the most effective anti-oxidants,
extreme pressure, anti-wear, and corrosion protecting
additives. PTFE is added to further enhance load
capacity and reduce friction. LU™205 Food Grade Chain
Lubricant offers excellent extreme pressure lubricity,
water resistance and high temperature performance on
chains and much more. Foaming action allows for
pin-point application and deep penetration.
•
For use in extreme pressure applications
•
Minimum - Maximum operational temperature range:
Low 12 °F (-11 °C)
•
High 450°F (232 °C)
•
Meets (OECD) 301B Standards - Rapidly Biodegradable
•
Free of heavy metals such as Barium & Cadmium
•
Contains P.T.F.E. (polytetrafluoroethylene)
•
HMIS Hazard Rating: Health (2)
•
Flammability (4)
•
Reactivity (0)
•
NSF® Nonfood Compounds Program Listed H1 Rated
(Registration # 145282)
•
Size: 15 oz. can, 12/case
SPRAYON®
Food Grade Silicone Lubricant
Sprayon® LU™ 210 Food Grade Silicone Lube is a 5%
low-viscosity silicone formula that is compatible with
most surfaces. Meets FDA regulation described in Title
21 paragraph 178.3570, when no more than 10 ppm is
imparted. NSF H1 rated for use in federally inspected
meat and poultry plants. Repels water and is
non-corrosive to metals. An excellent lubricant on
plastic, fiber gears, extruded parts, wood to wood
sliding applications and on rubber.
•
Lube - Light Pressure
•
Temp Range -40° To 450°F (-40° To 232°C)
•
5% Silicone
•
Spray Anyway Valve
•
HFR Rating - 2,4,0
•
NSF Registered H1 # 115089
•
Size: 10 oz. can, 12/case
SPRAYON®
Food Grade Anti-Seize
Sprayon® LU™621 Food Grade Anti-Seize is a premium,
synthetic, food grade, non-drying thread sealant and
anti-seize compound. Formulated with a balanced blend
of P.T.F.E. and other lubricating solids, LU™621 has been
engineered to provide a superior leak-proof seal for the
life of the connection while at the same time maintaining
its anti-seize capabilities allowing for easy disassembly
without thread damage.
•
For use in high pressure applications
•
Maximum Operational Temperature: 1,800 °F (982 °C)
•
Contains P.T.F.E. (polytetrafluoroethylene)
•
Military Specification: MIL-A-907E
•
HMIS Hazard Rating: Health (2)
•
Flammability (3)
•
Reactivity (0)
•
NSF® Nonfood Compounds Program Listed H1 Rated
(Registration # 145280)
•
Size: 15 oz. can, 12/case
SPRAYON®
Wasp and Hornet Killer
Blast’Em™
•
Kills wasps, hornets, yellow jackets, flies, mosquitoes
and flying moths
•
Residual deposit will kill returning wasps and hornets
•
Contains a high amount of petroleum distillates for the
best knockdown and kill rate
•
Will not harm most plastics, including Noryl, ABS and
Lexan
•
98% knockdown, 100% kill within 24 hours
•
Dielectric strength: 33,000 Volts
•
Sprays up to 20 feet with flood-type valve
•
EPA-Registered
SPRAYON®
Industrial Spray Adhesive
Heavy duty aerosol adhesive can be used to bond
laminates, plastic, cardboard, metal, ceramics, particle
board, paper and wood.
•
Bonds heavy-duty substrates
•
High strength
•
Heat resistant up to 170° f.
•
Controlled lace spray pattern
•
VOC & MIR compliant
•
Tack Range: 10-30 seconds
•
24oz. (16.75 oz. net)
Item #
KRS00205
Item #
KRS00210
Item #
KRS00621
Item # Size (oz.)
KRS00857
16
KRS20857
20
Item #
KRS0900000
