Sales
Rental
Repair
Power Tools & Accessories
Boise, ID 208-377-0158
Eugene, OR 541-342-3641
Idaho Falls, ID 208-522-7082
Medford, OR 541-779-0187
101
SHOP VAC CORP.
Vacuum Hose
Converter
•
Allows you to use 2-1/2"
accessories with a 1-1/2" hose
SHOP VAC CORP.
Vacuum Hose Coupling
•
Allows you to connect two 2-1/2"
hoses together
RIDGE TOOL CO.
12 Gallon Wet/Dry Vac
High Performance
•
5.0 Peak HP Motor
•
12 Gallon drum provides capacity
for clean-up of large spills
•
On-board Accessory Storage
•
1-Layer Standard pleated paper filter
•
Powerful 160 MPH exhaust airstream can be directed through the
vac hose to blow sawdust from tools and debris from garages,
decks and sidewalks
•
Includes: 2-1/2" x 7' Tug-A-Long® Locking Hose, 2 Extension
Wands, Utility Nozzle, Car Nozzle, Wet Nozzle, 1-Layer Paper
Pleated Filter and owner’s manual
Motor:
•
Air Watts: 270
•
CFM: 176
•
Amps: 10.0
•
Accessory Size: 2-1/2"
DELTA CONSOLIDATED INDUSTRIES
1-1/2 HP Contractor’s Saw
With 30” T2 Fence and Cast Iron Wings
•
Blade tilts away from the fence (left
tilt) in ripping applications to pre-
vent tearout on the outside corner
of a mitered joint
•
Large cast-iron table with cast-iron
extension wings measure a full
40-1/2" x 27" for maximum
material support
•
Mobile base attaches directly to wide-stance base for maximum saw
support and mobility
•
Deluxe T-Slot miter gauge with adjustable stops at 45° and 90°
•
Powerful 1-1/2 HP induction motor handles tough cutting
operations
DELTA CONSOLIDATED INDUSTRIES
Left Tilt Hybrid Saw
With T2 Fence, 30” Rail
Tableboard
•
Left tilting blade tilts away from
fence
•
45° and 90° bevel stops
adjustable from the table top; deluxe miter gauge
•
Oversized on/off switch with full overload protection
DELTA CONSOLIDATED INDUSTRIES
3 HP Motor 10” Unisaw®
With 52” Biesemeyer® Fence System
•
Dual front cranks make
adjusting blade height and blade
bevel easy, accurate, and
repeatable in all your operations
•
Biesemeyer® Fence System
provides hairline pointer and built-
in tape allowing you to make precision set-ups, cut after cut; 9-ply
fence faces have improved tolerances like no other as well as an
improved cam front lock lever for an over lock with a curved edge
DELTA CONSOLIDATED INDUSTRIES
12” Variable-Speed
Bench Drill Press
•
1/3 HP Induction Motor for long-lasting, smooth
performance
•
Adjustable-position, locking depth stop for
accurate depth measurement and repetitive
drilling
•
Tilting table with slots for fast clamping of work
•
Standard 3-jaw, 1/2" capacity chuck for positive gripping of various
drill press cutting tools
Item #
SH906-49-5
Item #
SH906-86-7
Item #
RI31668
Item #
DTDE36-980
Item #
DTDE36-715
Item #
DTDE36-L352
Item #
DTDEDP350
