Sales
Rental
Repair
Unistrut, Pipe Hangers & Caddy
Boise, ID 208-377-0158
Eugene, OR 541-342-3641
Idaho Falls, ID 208-522-7082
Medford, OR 541-779-0187
533
ERICO/CADDY
Plain and Threaded Rod
Hangers
Hammer-On
•
Beam clamps
•
Static load limit 200 lbs.
•
Qty. per Box: 100
ERICO/CADDY
Protection Plates
Press-On
•
Press-on protection plate for woods and metal
studs
ERICO/CADDY
Pipe Sleeve Positioners
•
Provides secure positioning of pipe
sleeve for concrete pouring of wall and
floor forms
•
Requires only a hammer to install
•
Will accommodate schedule #40, #80
and smaller wall thickness
•
No load rating - positioning only
•
Sleeve Diameter: All diameters, wall thickness: 5/16 in. and under
•
Qty. per box: 100
ERICO/CADDY
Conduit Supports
Support and Anti-Rattle
•
For conduit armored cable
•
Supports and anti-rattle
•
Supports conduit up to 1 in.
ERICO/CADDY
Cable/Conduit Supports
•
Cable/conduit from drop wire support
ERICO/CADDY
Cable Support Clips
•
cULus® Listed and complies with NEC® and
TIA requirements for structured cabling systems
•
Cost-effective alternative to expensive cable
tray
•
Galvanized finish on J-hooks provide smoother
cable pull and greater corrosion resistance.
•
Many sizes and designs available to attach to a
variety of structures
•
Provides proper support of Category 5e,
Category 6a, fiber optic and innerduct
•
Diameter Loop
ERICO/CADDY
3/4” Pipe Clip
•
Bolt Size: 1/4"
•
Conduit Size: EMT 3/4 in
•
Conduit Size: Rigid 3/4 in
•
Finish: Electro-zinc plated
•
Rec. Load: 250 lbs
•
Third Party Certifications: cUL®, UL®
ERICO/CADDY
Metal Stud Grommet
•
Snap one grommet into standard
1-11/32" field punched hole, OR
snap tight two together into any
shape factory punched hole
•
Provides 360° protection for cable
and makes cable pulls easier
•
Delivers compliance with:
NEC®Article 300.4(b)(1) and CEC
Rule 12-516
Item #
Flange Thickness (in.)
Rod Size
CA6TI24
¹⁄₈
-
¹⁄₄
³⁄₈
” Threaded
CA6TI58
⁵⁄₁₆
-
¹⁄₂
³⁄₈
” Threaded
Item #
CA304B2
Item #
CA740
Item #
CA781
Item #
Desc.
CAPCS2 Conduit/Cable Support from #8 - #12
Drop Wire for
¹⁄₂
” and
³⁄₄
” EMT,
MC/AC up to .900 O.D.
Item #
CACAT32AB
Item #
CACD1B
Item #
CAESG1
