Unistrut, Pipe Hangers & Caddy
www.edgecs.com
Spokane, WA 509-535-9841
Billings, MT 406-248-7196
Yakima, WA 509-248-1144
Gillette, WY 307-682-8522
522
ANVIL
Structural Attacjments
Fig. 112, 113 Brace Fitting Complete Pipe End Only
•
Size Range: 1” and 1-1/4”
•
Material: Malleable iron bracket and pipe end; hex cap screw and nut
•
Finish: Plain
•
Service: For bracing piping against sway and seismic movement
•
Installation: Normally two fittings are used; a Fig. 112 complete attached to one end of an IPS nipple and a Fig. 113 pipe end only attached to
the other end; the brace fitting completely connects to the building structure while the pipe end only connects to the pipe attachment. Use with
Fig. 212 FP pipe clamp see page 34
Features:
•
Two piece pivoted assembly accommodates any angle to structure
•
Sight hole in pipe end provides easy means of verifying proper thread engagement
Ordering:
•
Specify size, figure number, name
ANVIL
Brackets
Figure 194 Light Welded Steel Bracket
•
Material: Carbon steel
•
Finish: Plain or Galvanized
•
Recommended for support from below or above bracket
•
Complies with Federal Specification A-A-1192A (Type 31),
WW-H-171-E (Type 32), ANSI/MSS SP-69 and MSS SP-58 (Type 31). FM Approved when used with 3⁄8" rod, 3⁄4" - 4" pipe sizes & 1⁄2" rod,
5" - 8" pipe sizes.
•
Determine bracket size by dimension of standard bracket most suitable to the installation
•
Installation: When bolted to a wall, an additional back plate may be required of such thickness and size as to properly distribute the weight
over the wall. Size and thickness of the back plate is governed by the load to be carried and the nature and conditions of the wall. Back plates
furnished upon request
•
Specify bracket number, figure number, name and finish
Item #
Max Load
(lbs.)
Weight
(lbs.)
B (in.)
C (in.)
D (in.)
E (in.)
Hole Dia. H
(in.)
R (in.)
T (in.)
W (in.)
Fig. 112
AV112-1
850
.95
1
2
³⁄₁₆
1
¹¹⁄₁₆
1
¹⁄₂
⁹⁄₁₆
³⁄₄
¹⁄₄
1
¹⁄₂
AV112-1-1/4 1,150
1.40
1
2
³⁄₁₆
2
³⁄₁₆
1
¹⁄₂
³⁄₄
⁷⁄₈
⁵⁄₁₆
1
³⁄₄
Fig. 113
AV113-1
850
.50
1
2
³⁄₁₆
1
¹¹⁄₁₆
1
¹⁄₂
⁹⁄₁₆
³⁄₄
¹⁄₄
1
¹⁄₂
AV113-1-1/4 1150
.80
1
2
³⁄₁₆
2
³⁄₁₆
1
¹⁄₂
³⁄₄
⁷⁄₈
⁵⁄₁₆
1
³⁄₄
Item # Bracket No. Max Load (lbs.) Weight (lbs.)
W (in.)
C (in.)
D (in.)
AV194-1
1
750
3.1
9
6
¹⁄₂
⁵⁄₁₆
AV194-2
2
750
7.7
13
10
¹⁄₂
⁵⁄₁₆
AV194-3
3
750
12.8
19
16
¹⁄₂
³⁄₈
