Sales
Rental
Repair
Anchors & Fastener Systems
Boise, ID 208-377-0158
Eugene, OR 541-342-3641
Idaho Falls, ID 208-522-7082
Medford, OR 541-779-0187
553
SIMPSON STRONG-TIE®
High Strength Acrylic-Tie® Anchoring Adhesive
AT
•
AT Acrylic-Tie® is a two component, high solids, 10:1 ratio acrylic-based adhesive for use as a high
strength, anchor-grouting material
•
Formulated for use in all types of weather, AT is designed to dispense easily and cure at temperatures down
to 0°F
•
Resin and initiator are dispensed and mixed simultaneously through the mixing nozzle. AT meets the
physical requirements of ASTM C881, Type I & IV, Grade 3, Classes A, B & C, except Acrylic-Tie is a
non-epoxy product formulated for fast cure time
•
USES: Threaded rod anchoring, rebar doweling, pick-proof sealant around doors, windows and fixtures
•
Code Approvals: ICC-ES ER-5791* (CMU & URM); City of L.A. RR25459*; Florida FL 11506.1*; NSF/ANSI Standard 61 (11 in2/5000 gal);
Multiple DOT listings
•
SHELF LIFE: 12 months from date of manufacture in unopened cartridge
•
Cure Schedule (Base Material Temp° / Cure Time hrs.): 0/24, 40/4, 70/.5
SIMPSON STRONG-TIE®
Mixing Nozzles and Retaining Nuts
•
Mixing nozzles are designed for
the proper proportioning and
mixing of the different adhesive
formulations
•
EMN37A - This is an 18 element mixing nozzle for Epoxy-Tie
adhesives and for use with the 30oz. Acrylic-Tie cartridge. This
nozzle requires a separate nozzle retaining nut to attach to the
cartridge
•
EMN2256 - Retaining nuts for the EMN37A.
•
EMN50 - This is a Hi-Volume 5/8" diameter 24 element nozzle,
with an integrally molded retaining nut. This nozzle provides
approximately 2 times the dispensing rate of the EMN37A. The
major outer diameter is 7/8". Fits 22 oz., 30 oz. and 56 oz. SBS
cartridges.
•
AMN813-RP5 - This is a package of 5, 12 element mixing nozzles
with integrally molded retaining nut for use with 8oz. and 13oz.
Acrylic-Tie only.
SIMPSON STRONG-TIE®
Acrylic-Tie® Adhesive
Dispensing Tools
SIMPSON STRONG-TIE®
Hole Cleaning
Brushes
•
Used for cleaning drilled holes prior to adhesive anchor
installation. Brushes have a twisted wire handle and nylon bristles
Item #
Capacity (oz.) Cartridge Type Ctn Qty.
Dispensing Tool(s)
Mixing Nozzle
SNAT08
8
Side-by Side 10
ADT813B
AMN813 (Included)
SNAT10
9.6
Single
12 CDT10 or Standard 10 oz. Single Tube
Dispensing Tool
AMN813 (Included)
SNAT13
13
Side-by Side 10
ADT813B
AMN813 (Included)
SNAT30
30
Side-by Side 5
ADT30, ADT30P, ADT30CKT
EMN22i (Sold Separately)
Item #
Description
Pkg
Qty
SNEMN37B Mixing Nozzle Only, 14 in. Long,
Major Diameter
⁵⁄₈
in.
SNENN2256 Retaining Nuts Only for the EMN37
(Orange)
SNEMN50
Hi-Volume Nozzle for 22oz, 30oz
and 56oz SBS Cartridges (Separate
Retaining Nut not Required), 17 in.
Long, Major Diameter
⁷⁄₈
in.
SNAMN19Q-RP5 Five Mixing Nozzles for 8oz and
13oz SBS Acrylic-Tie Cartridges
Only, 8
¹⁄₂
in. Long
5
Item #
Description
SNADT813B Manual Tool for 8 oz. and 13 oz. Cartridges
SNADT30
Manual Tool for 30 oz. Cartridges
SNADT30CKT Battery Powered Tool for 30 oz. Cartridges
SNADT30P
Pneumatic Tool for 30 oz. Cartridges
Item #
Description
For
Anchor/Rebar
Diameter (in.)
Hole
Diameter(in.)
SNETB4
¹⁄₂
”x3” brush x 8” long
¹⁄₄
-
⁵⁄₁₆
³⁄₈
-
⁷⁄₁₆
SNETB6
³⁄₄
”x4” brush x 16” long
³⁄₈
-
⁵⁄₈
¹⁄₂
-
³⁄₄
SNETB8 1”x4” brushx 16” long
³⁄₄
¹³⁄₁₆
-
⁷⁄₈
SNETB8L 1”x4” brush x 24” long
³⁄₄
¹³⁄₁₆
-
⁷⁄₈
SNETB10 1
¹⁄₄
”x4” brush x 29” long
⁷⁄₈
-1
1-1
¹⁄₈
SNETB12 1
⁵⁄₈
”x6” brush x 34” long
1
¹⁄₄
1
³⁄₁₆
-1
³⁄₈
